Прескочи към главното съдържание

Run the OPC install script

в Install on Linux
Списък с автори
Публикувани: 29.06.2022 г.|Последно обновено: 6.03.2024 г.

The Deskpro On-Premise Controller can be installed through one of the following commands:

Ubuntu / Debian

curl https://get.deskpro.com/installer.sh -o /tmp/installer.sh && sudo bash /tmp/installer.sh
copy

RHEL / AlmaLinux / Rocky Linux

curl https://get.deskpro.com/installer.sh -o /tmp/installer.sh && sudo dnf install -y tar && sudo bash /tmp/installer.sh
copy

This will install all the dependencies for the On-Premise Controller and Deskpro to run on your server

Once the installer has finished, you will see a welcome screen: image.png

This will then prompt you to select the IP address for your management interface: image.png

Note


These are IP addresses which Deskpro has been able to identify from the server, but this may not display any IPs mapped via NAT or proxy.

In this instance, we recommend selecting the Local IP address.

If you do use a NAT or Proxy address, you may need to manually change any URLs in your browser to use those addresses until the OPC has been fully configured.

Once the OPC has finished installing, it will run through it's initialization checks, then will complete with a link to access the On-Premise Controller within your browser image.png

ПолезноНе беше полезно

6 от 6 души смятат тази страница за полезна

следваща страницаVMWare Prerequisites
предишна страницаLinux Prerequisites

Моля, логнете се или се регистрирайте, за да оставите коментар.